BMM Weston Deep Chested Ironers- 1300 Oil Heated
The BMM Weston 1300 is a completely new Oil heated Flatwork Ironer available in one or two rolls and standard widths of 2.5, 3.0, 3.3, 3.6 and 4.0 metres, designed to produce quality finishing at high production rates whilst minimising operating costs.
It is the result of a complete reappraisal of the fundamental principles of Flatwork Ironer design and construction that has resulted in employment of the latest technology in its operation and manufacture.
This development enables BMM Weston to advance their already high reputation for the manufacture of flatwork Ironers that are reliable, economic to run, give high production and comply with European Health and Safety regulations.
BMM Weston 1300 Flatwork Ironers feature
- Optimised bed design that ensures efficient operation over a wide range of conditions.
- Pneumatic raising and automatic aligning of beds and rolls
- Integrated design of rolls and beds to ensure uniform heat transfer, thus optimising clothing life
- Chest contours that eliminate gap pieces
- Minimum energy needs for drive system
- Simple, electronic, variable speed motor and drive system providing quiet, efficient, slip-free transition
- Analogue information system
- Inclined, ergonomically designed feed table for dafe, efficient hand or mechanical feeding.
- Centralised moisture extraction system.
- Thermally insulated.
- Removable side covers for external servicing.
Optional extras include
- Integral Fast Feed aid.
- Feed through assembly.
- Hoods and walkways.
- Handrails and interconnected ladder.
- Take-off table assembly.
- Digital information system.
- Steam trap monitoring.
- High temperature clothing.
- Feeder/Folder, plugs and sockets.
- Special wiring to stop ironer from folder.
| Dimensions | ||
|---|---|---|
| No. of rolls | 1 | 2 |
| A | 2285 mm | 3835 mm |
| B | 4200 mm | 4200 mm |
| C | 1780 mm | 1780 mm |
| Technical data | ||
| Working width | 3000 mm | 3000 mm |
| Roll diameter | 1300 mm | 1300 mm |
| Speed range | 0-30 m/min | 0-40 m/min |
| Oil flow rate | 17 m³/hr | 17 m³/hr |
| Oil back pressure | 2.5 Bar | 5.0 Bar |
| Energy Required (BTU's) | 1,200,000 | 2,200,000 |
| Air pressure | 5.5-7 Bar | 5.5-7 Bar |
| Air consumption (free air lift cycle) | 48 Litres | 96 Litres |
| Electrical supply (standard) | 380-415 Volts / 3ph + N / 50Hz | |
| Electrical consumption | 8 kW | 13.5 kW |
For further information on our laundry finishing range please contact James Juniper:
Tel: +44 (0)1795 597114 • Fax: +44 (0)1795 538891 • E-mail: jjuniper@bmmweston.co.uk