Type QJS217

Noise Controlled Jolt Squeeze Moulding Machine

A member of the QJS range featuring a 17” diameter squeeze piston which is capable of generating squeeze forces in the region of 16000kg. A suitable alternative or replacement for the CT3 moulding machine.

Special Features:

• Noise Controlled
• Combined Jolt Squeeze
• Accurate Centreline Draw
• Variable Jolt Timers
• Operational Roller on Pin Lift Draw
• Operational Safety Guards
• Operational Pneumatic, Electrical or Microprocessor Control

Overall Dimensions
Dimensions	mm	in
A	2030	80
B	750	29 ½
C max	584	23
C min	330	13
D max	854	33 ¼
D min	595	23 ½
E	434	17
F	485	19
G	800	31 ½
H	1770	69 ¾
I	2190	86 ¼
J	560	22
K	1160	45 ¾
Technical data
Jolt Capacity	680 kg	1500 lb
Static Squeeze Pressure	9260 kg	20420 lb
Dynamic Squeeze Pressure	16200 kg	35700 lb
Squeeze Stroke	180 mm	7 in
Pattern Draw	305 mm	12 in
Table Size Roller-lift	840 x 560 mm	33 x 22 in
Free Air Consumption
Average per cycle	0.99 m³	35 ft³
Shipping Specifications
Net Weight	3709 kg	8175 lb
Gross Weight	4075 kg	8981
Case Size	5.5 m³	195 ft³

*Jolt capacity and static squeeze pressure calculated at 90 PSI

Static squeeze pressure increase by approximately 100% during simultaneous jolt squeezes.

You are here > Foundry machines > Machine Range > Type QJS217