Type HJ4

Hydrajolt Noise Controlled Moulding Machine

The smaller version of the Swing Arm-Anvil Jolt + High Pressure Hydraulic Squeeze machine. Ideally suited for Flat plate work, Manhole covers &frames etc. High mould hardness values and uniform density is achieved by limited pre-compaction jolting and a high pressure squeeze via the remote free standing hydraulic power pack. Typical box size of 48” x 30” can be used.

Special Features:

• Noise Controlled Pre Jolt
• No Simultaneous Jolt Squeeze
• Operational Roller on Pin Lift Draw
• High Pressure Hyrdaulic Squeeze
• Low Maintenance

Overall Dimensions

Dimensions
A	762 mm	30 in
B	1512 mm	59 ½ in
C	2572 mm	101 ¼ in
D	1981 mm	78 in
E	546 mm	21 ½ in
F	546 mm	21 ½ in
G	657 mm	25 7/8 in
H	959 mm	37 ¾ in
J	419 mm	16 ½ in
K	686 mm	27 in
J	825 mm	32 ½ in
Technical data
Jolt Capacity	1134 kg	2500 lb
Squeeze Pressure	58964 kg	130000 lb
Squeeze Stroke	194 mm	7 5/8 in
Pattern Draw	300 mm	13 in
Table Size (Rollers)	1067 x 622 mm	42 x 24 ½ in
Table Size (Pins)	1168 x 838 mm	46 x 33 in
Air Consumption (per cycle)	0.57 m³	20 ft³
Shipping Specifications
Net Weight	4065 kg	8943 lb
Gross Weight	4535 kg	9977 lb
Case Size	11.2 m³	396 ft³
Power Pack Net Weight	686 kg	1509 lb
Gross Weight	957 kg	2105 lb
Case Size	2.2 m³	78 ft³

*Jolt capacity and static squeeze pressure calculated at 90 PSI

You are here > Foundry machines > Machine Range > Type HJ4