CY Machine

Turnover Moulding Machine Special Features:

Special Features

• Anvil Jolt
• Turnover Draw
• Manual Control
• Simple Operation
• Ease of Maintenance

Produced in a single size, the type CY Turnover Draw Machine is low cost, manually operated, alternative to the larger and more sophisticated BT machines. The anvil jolt ensures even sand distribution into the deepest corners and pockets which, coupled with the squeeze, achieves a uniform hardness of mould. Capable of handling a wide range of flask sizes, an extended roller head can be provided to aid mould discharge onto gravity conveyor.

Technical Data

*Jolt capacity calculated at 90 psi (6.1 atu).

Air consumption per average cycle 17 ft 3 0.48m3 free air.

Guards

Standard guards with safety interlocks can be provided where local legislation makes guarding of such equipment mandatory.

For further information consult BMM Weston Guarding Brochure.

Specifications

Jolt Capacity*
340 kg
750 lb

Squeeze Pressure*
4605 kg
10,150 lb

Pattern Draw 229 mm
9 in

Table Size
914 x 635 mm
36 x 25 in

Net Weight
1804 kg
3976 lb

Gross Weight
2030 kg
4480 lb

Case Size
4.66 m³
165 ft³

This information is for guidance only and should not be used for the installation purposes. A certified installation drawing is available on request.

You are here > Foundry machines > Machine Range > BMM Weston Type CY