Type CT7

Jolt Squeeze Moulding Machine

The largest option in the CT range capable of utilising boxes of 60” x 40” and often used in conjunction with the BT7 turn over machine, to produce a wide range of large cast components.

Special Features:

• Combined Jolt Squeeze
• Accurate Draw
• Low Maintenance
• Operational Roller or Pin Lift Draw
• Operational Safety Guards
• Operation Pneumatic, Electrical or Microprocessor Control

Overall Dimensions

Dimensions
A	1048 mm	41 ¼ in
B	1346 mm	53 in
C	2467 mm	97 1/8 in
D	2091 mm	74 ¾ in
E	603 mm	23 ¾ in
F	584 mm	23 in
G	727 mm	28 5/8 in
H	1028 mm	40 ½ in
J	562 mm	22 1/8 in
K	867 mm	34 1/8 in
L	819 mm	32 ¼ in
Technical data
Jolt Capacity	1818 kg	4000 lb
Squeeze Pressure	18140 kg	40000 lb
Squeeze Stroke	254 mm	10 in
Pattern Draw	330 mm	13 in
Table Size (rollers)	1194 x 689 mm	47 x 27 1/8 in
Table Size (pins)	1312 x 914 mm	52 x 36 in
Free Air Consumption per cylce	1.98 m³	70.0 ft³
Shipping Specifications
Net Weight	6325 kg	13944 lb
Gross Weight	6642 kg	14644 lb
Case Size	10.0 m³	351 ft³

*Jolt capacity and static squeeze pressure calculated at 90 PSI
*Static squeeze pressure increase by approximately 100% during simultaneous jolt squeezes

You are here > Foundry machines > Machine Range > Type CT7