Type BT7

Jolt Squeeze, Turnover Draw Moulding Machines

A combined jolt squeeze roll-over draw moulding machine with similar features to the BT5 with an applied jolt load to the table of 1814 kg. Capable of producing difficult to strip moulds in boxes of up to 60” x 40”. Extremely useful in the production of large brake drums and other deep draw codded work.

Special Features:

• Combined Jolt Squeeze
• Turnover Draw
• Tilting Roll-out Head
• Auto/manual Pneumatic Control
• Operational Safety Guards
• Low Maintenance

Overall Dimensions

Dimensions
A	2205 mm	98 5/8 in
B	521 mm	20 ½ in
C	584 mm	23 in
D Max	965 mm	38 in
D Min	762 mm	30 in
E	1457 mm	57 3/8 in
F	3096 mm	121 7/8 in
G	1718 mm	67 5/8 in
H	1384 mm	54 ½ in
Technical data
Jolt Capacity	1814 kg	4000 lb
Squeeze Pressure	18144 kg	40000 lb
Squeeze Stroke	406 mm	16 in
Pattern Draw	406 mm	16 in
Table Size	1350 x 965 mm	53 x 38 in
Free Air consumption (Average per cycle)	2.33 m³	82.5 ft³
Shipping Specifications
Net Weight	11176 kg	26640 lb
Gross Weight	12090 kg	28656 lb
Case Size	19.2 m³	680 ft³

*Jolt capacity and static squeeze pressure calculated at 90 PSI
*Static squeeze pressure increase by approximately 100% during simultaneous jolt squeezes

You are here > Foundry machines > Machine Range > Type BT7